?/DIV>
1
8
where f is the operating frequency, C
OUT
is the output
capacitance and I
RIPPLE
is the ripple current in the induc-
tor. The output ripple is highest at maximum input voltage
since I
L
increases with input voltage.
Manufacturers such as Nichicon, United Chemicon and
Sanyo should be considered for high performance through-
hole capacitors. The OS-CON semiconductor dielectric
capacitor available from Sanyo has the lowest ESR (size)
product of any aluminum electrolytic at a somewhat
higher price. Once the ESR requirement for C
OUT
has been
met, the RMS current rating generally far exceeds the
I
RIPPLE(P-P)
requirement.
Figure 3. Line Regulation of V
REF
and V
ITH
INPUT VOLTAGE (V)
2.0
105
100
95
90
85
80
75
2.2 2.4 2.6 2.8
3700 F03
3.0
V
REF
V
ITH
In surface mount applications, multiple capacitors may
have to be paralleled to meet the ESR or RMS current
handling requirements of the application. Aluminum elec-
trolytic and dry tantalum capacitors are both available in
surface mount configurations. In the case of tantalum, it is
critical that the capacitors are surge tested for use in
switching power supplies. An excellent choice is the AVX
TPS, AVX TPSV and KEMET T510 series of surface mount
tantalum, available in case heights ranging from 2mm to
4mm. Other capacitor types include Sanyo OS-CON,
Nichicon PL series and Panasonic SP.
Low Supply Voltage Operation
Although the LTC3700 can function down to 2.1V (typ),
the maximum allowable output current is reduced when
V
IN
decreases below 3V. Figure 3 shows the amount of
change as the supply is reduced down to 2.2V. Also shown
in Figure 3 is the effect of V
IN
on V
REF
as V
IN
goes below
2.3V.